IDES Prospector Already have an account? Login Here

IDES

Bayblend® FR 3005 HF

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayblend® FR 3005 HF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bayblend FR 3005HF is a high flow, non-reinforced, flame-retardant, amorphous, thermoplastic polymer blend on the basis of polycarbonate (PC) and acrylonitrile butadiene styrene copolymer (ABS). The flame retardant contains no antimony, bromine or chlorine.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Amorphous
  • Antimony Free
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • High Flow
Agency Ratings 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (240°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Spiral Flow Length (490°F, 0.10 in)
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Flexural Strength (5.0% Strain)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Instrumented Dart Impact 2, 3 (73°F, 0.125 in, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.250 in
°F
  
264 psi, Unannealed, 0.250 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.0787 in
 
  
0.118 in
 
  
Glow Wire Ignition Temperature (0.0394 in)
°F
 IEC 60695-2-13
UL
Nominal Value
Unit
Test Method
RTI Str (0.0591 in)
°F
 UL 746
RTI Imp (0.0591 in)
°F
 UL 746
RTI Elec (0.0591 in)
°F
 UL 746
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (500°F, 1000 sec^-1)
Pa·s
 ASTM D3835
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® FR 3005 HF, Bayblend FR 3005 HF, Bayblend® , Bayblend, BayblendFR3005HF, FR 3005 HF, FR3005, 3005HF, FR3005HF, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 3005FR
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free, No Antimony, Antimony free.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (3).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
222.0 ft/sec
30.5 in dart, 3 in clamp
4Rate B (120°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.