IDES Prospector Already have an account? Login Here

IDES

Daploy™ WB260HMS

Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for Daploy™ WB260HMS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Durable
  • Foamable
  • Good Melt Strength
  • High Stiffness
  • Recyclable Material
Uses 
  • Containers
  • Insulation
  • Non-specific Food Applications
  • Packaging
  
Forms 
  • Granules
Processing Method 
  • Foam Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Additional Information
Store in dry conditions at temperatures below 50°C and protect from UV-light
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daploy™ WB260HMS, Daploy WB260HMS, Daploy™ , Daploy, DaployWB260HMS, WB 260 HMS, WB260HMS, WB260, 260HMS, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 260WB
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Melt Strength, High Stiffness.
Uses
Uses may also be described by the following terms: Food Applications.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.