IDES Prospector Already have an account? Login Here

IDES

Marlex® 1122B

Low Density Polyethylene

Supplied by Chevron Phillips Chemical Company LLC

The technical datasheet with complete property values for Marlex® 1122B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • Autoclavable
  • Food Contact Acceptable
  • Good Flexibility
  • Good Mold Release
  • Homopolymer
  • Medium Flow
  • Warp Resistant
Uses 
  • Closures
  • Medical/Healthcare Applications
  
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - Tangent 3
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746A
Vicat Softening Temperature
°F
 ASTM D1525 4
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® 1122B, Marlex 1122B, Marlex® , Marlex, Marlex1122B, 1122 B, 1122B, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, CP Chem, PolyethyleneLowDensity, B1122
Features
Features may also be described by the following terms: Good Flexibility, Flexible, Medium Flow, Medium Melt, Medium MFI, Good Mold Release, Easy Release, Good Demolding, Warp Resistant, Warpage Resistant, Autoclavable, Autoclave.
Uses
Uses may also be described by the following terms: Medical Applications.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), ASTM (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
30.50 in/min
4Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.