TATREN HM 35 45 Slovnaft Polypropylene Homopolymer

Product Description

TATREN HM 35 45 is controlled rheology homopolymer of higher fluidity and narrow molecular weight distribution. This grade contains nucleating and antistatic agent. TATREN HM 35 45 is characterised by excellent mechanical properties and high stiffness. It has high crystallisation temperature which allows good de-moulding at higher temperature and shorter moulding cycles.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antistatic

Nucleating Agent

Features

Antistatic

Controlled Rheology

Fast Molding Cycle

Food Contact Acceptable

Good Mold Release

High Flow

Homopolymer

Narrow Molecular Weight Distribution

Nucleated

Recyclable Material

Uses

Caps

Containers

Food Packaging

Furniture

General Purpose

Household Goods

Lids

Media Packaging

Thin-walled Parts

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Injection Molded)		psi	ISO 527-2
Tensile Stress (Yield, Injection Molded)		psi	ISO 527-2
Tensile Strain (Yield, Injection Molded)		%	ISO 527-2
Flexural Modulus (Injection Molded)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1A
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® HM 35 45 , TATREN HM 35 45, TATREN® , TATREN, TATRENHM3545, HM 35 45, HM35, 3545, HM3545, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 35HM
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Mold Release, Easy Release, Good Demolding, High Flow, High Melt, High MFI, Narrow Molecular Weight Distribution, Narrow MW Distribution.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Household Goods, Housewares, Food Packaging, Media Packaging, Closure Caps, Caps, Cap.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F

Notes

¹Typical properties: these are not to be construed as specifications.

TATREN® HM 35 45

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.