IDES Prospector Already have an account? Login Here

IDES

TATREN® HT 3 06

Polypropylene Homopolymer

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for TATREN® HT 3 06 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TATREN HT 3 06 is homopolymer of good processing stability and it can be processed at high throughput. Additive package of this grade provides for low water carry over during production of tapes.
TATREN HT 3 06 is characterised by exceptionally high mechanical properties and high stiffness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Fast Molding Cycle
  • Food Contact Acceptable
  • Good Processing Stability
  • High Stiffness
  • Homopolymer
  • Low Water Carryover
  • Recyclable Material
Uses 
  • Bags
  • Carpet Backing
  • Monofilaments
  • Packaging
  • Pharmaceutical Packaging
  • Rope
  • Tape
  • Textile Applications
  • Twine
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Extrusion
  • Injection Molding
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® HT 3 06 , TATREN HT 3 06, TATREN® , TATREN, TATRENHT306, HT 3 06, HT3, 306, HT306, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Slovnaft, PolypropyleneHomopolymer, PPHomopolymer, 3HT
Features
Features may also be described by the following terms: Good Processing Stability, Good Process Stability, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Stiffness, Low Water Carryover.
Uses
Uses may also be described by the following terms: Monofilaments, Monofilament, Pharmaceutical Packaging.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.