IDES Prospector Already have an account? Login Here

IDES

Crastin® CE2055 NC010

THERMOPLASTIC POLYESTER RESIN

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Crastin® CE2055 NC010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Crastin® CE2055 NC010 is an unreinforced, low viscosity polybutylene terephthalate resin for injection molding.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Low Viscosity
  • Lubricated
  
RoHS Compliance 
Automotive Specifications 
  •  1
  
Appearance 
  • Natural Color
Part Marking Code (ISO 11469)
  • >PBT<
Resin ID (ISO 1043)
  • PBT
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (250°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
     ISO 294-4
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain
      
Yield, 73°F
%
 ISO 527-2
Break, 73°F
%
 ISO 527-2/50
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
66 psi, Annealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi, Annealed
°F
 ISO 75-2/A
Melting Temperature 3
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Crastin® CE2055 NC010, Crastin CE2055 NC010, Crastin® , Crastin, CrastinCE2055NC010, CE 2055 NC 010, CE2055 NC010, CE2055, 2055NC, NC010, CE2055NC010, Polybutylene Terephthalate, PBT, Polyester, DuPont, PolybutyleneTerephthalate, 2055CE
Features
Features may also be described by the following terms: Low Viscosity.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1), CHRYSLER (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum
°F
  
Drying Recommended
 
  
Notes
1This specification is applicable for the Americas region.
2Typical properties: these are not to be construed as specifications.
310°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.