IDES Prospector Already have an account? Login Here

IDES

SABIC® LDPE 1965Z500

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LDPE 1965Z500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LDPE Powder 1965Z500 is an additive free standard CTR® tubular grade with a very high melt flow rate and is known for its high filler/pigments acceptance properties. This grade is supplied in powder form. SABIC® LDPE Powder 1965Z500 is a medium sized powder grade with an extreme low viscosity for textile coating, carpet backing, and compounding applications. It is further suited for masterbatches with a very high loading of carbon black, titanium dioxide or pigment.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Additive Free
  • High Flow
  • Low Viscosity
Uses 
  • Carpet Backing
  • Coating Applications
  • Compounding
  • Masterbatch
  • Textile Applications
Forms 
  • Powder
Processing Method 
  • Compounding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Additional Information
Dry Flow, ISO 6186: 23 seconds
Particle SIze Powder, ASTM 1181: <600 µm
Melting Point, DIN 53765: 104°C
Enthalpy Change, DIN 53765: 95 J/g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 1965Z500, SABIC LDPE 1965Z500, SABIC® LDPE , SABIC LDPE, SABICLDPE1965Z500, SABICLDPE, LDPE 1965 Z 500, LDPE1965Z500, LDPE1965, LDPE, 1965 Z 500, 1965Z500, 1965Z, Z500, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, Z1965, 1965LDPE
Features
Features may also be described by the following terms: Additive Free, No Additives, High Flow, High Melt, High MFI, Low Viscosity.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.