SABIC LLDPE 6821WE SABIC Polyethylene, Linear Low Density

Product Description

SABIC® LLDPE 6821WE is a hexene-linear low density polyethylene. Films made from this resin exhibit outstanding tensile strength, stiffness, dart drop, impact strength, tear strength and hottack properties. This material contains a high amount of anti block and slip erucamide. The suffix E denotes European origin.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antioxidant

High Antiblock (350 ppm)

High Slip (150 ppm)

Features

Good Tear Strength

Low Density

Ultra High Impact Resistance

Ultra High Stiffness

Uses

Film

Food Packaging

Heavy-duty Bags

Laminates

Stretch Wrap

Forms

Film

Processing Method

Blow Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Secant Modulus			ASTM D882
MD: 2.0 mil		psi
TD: 2.0 mil		psi
Tensile Stress			ISO 527-3
MD: Yield, 2.0 mil		psi
TD: Yield, 2.0 mil		psi
MD: 2.0 mil		psi
TD: 2.0 mil		psi
Tensile Elongation			ISO 527-3
MD: Break, 2.0 mil		%
TD: Break, 2.0 mil		%
Total Energy Impact (2.0 mil)		ft·lb	ASTM D4272
Elmendorf Tear Strength			ISO 6383-2
MD: 2.0 mil		lbf
TD: 2.0 mil		lbf
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature		°F
Optical	Nominal Value	Unit	Test Method
Gloss (45°)			ASTM D2457
Haze		%	ASTM D1003
Additional Information
The value Haze, ASTM D1003, was tested in a Hazemeter Clarity, SABIC Method: 20 mV Puncture Resistance, SABIC Method: 450 J/m Blocking, SABIC Method: 10 g Re-blocking, SABIC Method: <10 g Kiefel IBC: 140 kg/h Die Size: 200 mm Die Gap: 2.7 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LLDPE 6821WE, SABIC LLDPE 6821WE, SABIC® LLDPE , SABIC LLDPE, SABICLLDPE6821WE, SABICLLDPE, LLDPE 6821 WE, LLDPE6821WE, LLDPE6821, LLDPE, 6821 WE, 6821WE, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, SABIC, PolyethyleneLinearLowDensity, WE6821, 6821LLDPE
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Ultra High Stiffness, Ultra High Impact Resistance, Good Tear Strength.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags, Stretch Wrap, Food Packaging.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® LLDPE 6821WE

Linear Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)