SABIC PPcompound 2500-6 SABIC Polypropylene, Unspecified (Mineral Filler)

Product Description

SABIC® PPcompound 2500/6 is a mineral filled modified polypropylene. Typical material properties include very high flow, high impact, good stiffness and low shrinkage and CLTE. Typical material properties also include good chemical resistance and esthetical performance. Typical applications include automotive exterior trims such as lateral siding, bumper strips and bumpers. It can be used in painted and unpainted applications with UV
stabilization added on demand.

SABIC® PPcompound 2500/6 is a designated automotive grade.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Mineral Filler

Features

Good Chemical Resistance

Good Stiffness

High Flow

High Impact Resistance

Low Shrinkage

Paintable

Uses

Automotive Applications

Automotive Bumper

Automotive Exterior Parts

Automotive Exterior Trim

Automotive Specifications

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage (24 hr)		%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2/5/50
Yield, 0.126 in, Injection Molded		psi
Break, 0.126 in, Injection Molded		psi
Tensile Strain (Break, 0.126 in, Injection Molded)		%	ISO 527-2/5/50
Flexural Modulus² (Injection Molded)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)			ISO 179/1eA
Charpy Unnotched Impact Strength (-40°F, Injection Molded)			ISO 179/1eU
Notched Izod Impact Strength			ISO 180/4A
-4°F, Injection Molded		ft·lb/in²
32°F, Injection Molded
73°F, Injection Molded
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Vicat Softening Temperature		°F	ISO 306/A
CLTE - Flow			ASTM D696
-22 to 86°F		in/in/°F
73 to 176°F		in/in/°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 2500-6, SABIC PPcompound 25006, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound25006, SABICPPcompound, PPcompound 2500 6, PPcompound 2500, 2500, PPcompound2500-6, PPcompound25006, PPcompound2500:6, PPcompound2500/6, PPcompound2500+6, PPcompound2500_6, PPcompound2500 6, PPcompound2500, 2500-6, 25006, 2500:6, 2500/6, 2500+6, 2500_6, 2500 6, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, 62500, 2500PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, High Impact Resistance, Good Stiffness, Good Chemical Resistance, Chemical Resistant, Low Shrinkage.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers, Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²Method I (3 point load)

SABIC® PPcompound 2500-6

Polypropylene

Mineral Filler

Supplied by Saudi Basic Industries Corporation (SABIC)