IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound 5405

Polypropylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound 5405 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound 5405 is a modified polypropylene compound. Material properties include excellent flow, high impact and good stiffness. The material exhibits excellent esthetical behaviour with very low tiger stripes visibility. Typical applications include automotive exterior parts such as large complex shaped bumpers and trims which can be painted, partialy painted or unpainted.

SABIC® PPcompound 5405 is a designated automotive grade.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Impact Modifier
Features 
  • Good Flow
  • Good Stiffness
  • High Impact Resistance
  • Impact Modified
  • Paintable
Uses 
  • Automotive Bumper
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (24 hr)
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5/50
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Strain (Break, 0.126 in, Injection Molded)
%
 ISO 527-2/5/50
Flexural Modulus 2 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
 
 ISO 179/1eA
Charpy Unnotched Impact Strength (-40°F, Injection Molded)
 
 ISO 179/1eU
Notched Izod Impact Strength
     ISO 180/4A
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
CLTE - Flow
     ASTM D696
-22 to 86°F
in/in/°F
  
73 to 176°F
in/in/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 5405, SABIC PPcompound 5405, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound5405, SABICPPcompound, PPcompound 5405, PPcompound5405, PPcompound, 5405, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, 5405PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Flow, High Impact Resistance, Good Stiffness.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers.
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.