IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound 7610

Polypropylene

Mineral Filler

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound 7610 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound 7610 is a mineral filled modified polypropylene. This material combines good flow with a good impact and high stiffness level. The material is UV stabilized and offers a good scratch resistance and a low shrinkage/CLTE. Typical applications include unpainted automotive exterior parts such as lateral siding, rocker panels and bumper strips.

SABIC® PPcompound 7610 is a designated automotive grade.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler
Additive 
  • Impact Modifier
  • UV Stabilizer
  
Features 
  • Good Flow
  • Good UV Resistance
  • High Impact Resistance
  • High Stiffness
  • Impact Modified
  • Scratch Resistant
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (24 hr)
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5/50
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Strain (Break, 0.126 in, Injection Molded)
%
 ISO 527-2/5/50
Flexural Modulus 2 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
 
 ISO 179/1eA
Charpy Unnotched Impact Strength (-40°F, Injection Molded)
 
 ISO 179/1eU
Notched Izod Impact Strength
     ISO 180/4A
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
 
  
73°F, Injection Molded
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
CLTE - Flow
     ASTM D696
-22 to 86°F
in/in/°F
  
73 to 176°F
in/in/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 7610, SABIC PPcompound 7610, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound7610, SABICPPcompound, PPcompound 7610, PPcompound7610, PPcompound, 7610, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, 7610PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Flow, High Impact Resistance, High Stiffness, Scratch Resistant, Resists Scratches, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.