IDES Prospector Already have an account? Login Here

IDES

AZDEL* C327-B01

Polypropylene

Glass Fiber Reinforcement, 31%

Supplied by Azdel, Inc.

The technical datasheet with complete property values for AZDEL* C327-B01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AZDEL C327-B01 is a glass mat thermoplastic laminate based oupon a random oriented chopped fiber mat and material filler contained within a polypropylene resin matrix. This composite material features high flow properties and a very homogeneous fiber distribution into features such as ribs and bosses is desired.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 31% Filler by Weight
Features 
  • High Flow
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow (0.170 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Instrumented Dart Impact
     ASTM D3763
4.00 in, Energy at Failure
in·lb
  
4.00 in, Energy at Max Load
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE - Flow (-40 to 250°F)
in/in/°F
 ASTM E831
Additional Information
Specific Gravity, ISO 1183, Laminate: 1.12
Specific Gravity, ISO 1183, Molded: 1.15
Sheet Thickness, internal: 4.32mm
Basis Weight (Mass per unit area), internal: 4.83 kg/m²
Poisson's Ratio, ISO 527: 0.428
Multiaxial Impact, ASTM D-3763, Force @ max load, 4.0" thickness: 2629 N
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AZDEL* C327-B01, AZDEL C327B01, AZDEL* , AZDEL, AZDELC327B01, C 327, C 327 B 01, C327-B01, C327B01, C327:B01, C327/B01, C327+B01, C327_B01, C327 B01, C327, 327B, B01, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 327C
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.