IDES Prospector Already have an account? Login Here

IDES

Ravago Compounds PP-3442

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by Ravago Manufacturing Americas, LLC

The technical datasheet with complete property values for Ravago Compounds PP-3442 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Key Features:
  • Polypropylene Homopolymer
  • 20% Talc filled
  • Designed for profile extrusion and sheet applications
  • Good balance of processability and physical properties
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Features 
  • Good Processability
  • Homopolymer
  
Uses 
  • Sheet
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus - Tangent (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0600 in
 
  
0.120 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ravago Compounds PP-3442, Ravago Compounds PP3442, Ravago Compounds , RavagoCompoundsPP3442, RavagoCompounds, PP, CompoundsPP-3442, CompoundsPP3442, CompoundsPP:3442, CompoundsPP/3442, CompoundsPP+3442, CompoundsPP_3442, CompoundsPP 3442, CompoundsPP, PP-3442, PP3442, PP:3442, PP/3442, PP+3442, PP_3442, PP 3442, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, Ravago Americas, PolypropyleneHomopolymer, PPHomopolymer, 3442PP, 3442CompoundsPP
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Injection Notes
Hot Runner Temperature (if applicable): 420 to 450°F
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.