IDES Prospector Already have an account? Login Here

IDES

Radilon® A RV300RKC

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Radici Plastics

The technical datasheet with complete property values for Radilon® A RV300RKC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PA66 30% Glass Fiber reinforced injection moulding grade. High stiffness and dimensional stability. Heat stabilized and high hydrolysis resistance. Natural colour
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Dimensional Stability
  • Heat Stabilized
  • High Stiffness
  • Hydrolysis Resistant
 
Automotive Specifications 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183
Water Absorption
      ISO 62
Saturation, 73°F
--
%
 
Equilibrium, 73°F, 50% RH
--
%
 
Viscosity Number
--
cm³/g
ISO 307
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
      ISO 179/eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
      ISO 179/eU
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature
       
66 psi, Unannealed
--
°F
ISO 75-2/Bf
264 psi, Unannealed
--
°F
ISO 75-2/Af
Vicat Softening Temperature
--
°F
ISO 306/B50
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
--
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Comparative Tracking Index
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
      UL 94
0.0315 in
--
 
 
0.0630 in
--
 
 
Additional Information
Dry
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357-1-3 at a heating rate of 10°C/min.
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radilon® A RV300RKC, Radilon A RV300RKC, Radilon® , Radilon, RadilonARV300RKC, A RV 300 RKC, A RV300RKC, ARV, RV300, 300RKC, ARV300RKC, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Radici Plastics, Polyamide66, Nylon66, RVA
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: High Stiffness, Good Dimensional Stability, Dimensionally Stable, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Automotive Specifications
Dry
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Radilon® A RV300RKC, Radilon A RV300RKC, Radilon® , Radilon, RadilonARV300RKC, A RV 300 RKC, A RV300RKC, ARV, RV300, 300RKC, ARV300RKC, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Radici Plastics, Polyamide66, Nylon66, RVA
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.