Raditer B N100 Radici Plastics Polybutylene Terephthalate

Product Description

PBT injection moulding grade. Natural colour.

General

Material Status

Availability

Appearance

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Yield)		%	ISO 527-2
Nominal Tensile Strain at Break		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/eU
-22°F
73°F
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature		°F	ISO 306/B50
Melting Temperature (DSC)		°F	ISO 3146
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	IEC 60093
Comparative Tracking Index		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0315 in
0.0630 in
Additional Information
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357-1-3 at a heating rate of 10°C/min.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Raditer® B N100, Raditer B N100, Raditer® , Raditer, RaditerBN100, B N 100, B N100, BN, N100, BN100, Polybutylene Terephthalate, PBT, Polyester, Radici Plastics, PolybutyleneTerephthalate, NB

Notes

¹Typical properties: these are not to be construed as specifications.

Raditer® B N100