IDES Prospector Already have an account? Login Here

IDES

Raditer® B RVA100

Polybutylene Terephthalate

Glass Fiber Reinforcement, 10%

Supplied by Radici Plastics

The technical datasheet with complete property values for Raditer® B RVA100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PBT/ASA blend 10% Glass fibre reinforced injection moulding grade. For items with enhanced stiffness. High dimensional stability and Low warpage. Good surface quality. Natural colour.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Good Dimensional Stability
  • Good Stiffness
  • Good Surface Finish
  • Low Warpage
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Af
Melting Temperature (DSC)
°F
 ISO 3146
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357-1-3 at a heating rate of 10°C/min.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Raditer® B RVA100, Raditer B RVA100, Raditer® , Raditer, RaditerBRVA100, B RVA 100, B RVA100, BRVA, RVA100, BRVA100, Polybutylene Terephthalate, PBT, Polyester, Radici Plastics, PolybutyleneTerephthalate, RVAB
Features
Features may also be described by the following terms: Good Stiffness, Good Dimensional Stability, Dimensionally Stable, Low Warpage, Low Warp, Good Surface Finish.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.