IDES Prospector Already have an account? Login Here

IDES

Hostalen ACP 5831 D

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostalen ACP 5831 D is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hostalen ACP 5831 D is a high density polyethylene (HDPE) resin used in small blow molding applications such as thin-wall packaging, consumer goods and toys. It exhibits a very good combination of high stiffness and high stress cracking resistance. Hostalen ACP 5831 D is delivered in pellet form, demonstrates good organoleptic properties, contains antioxidants and has a broad molecular weight distribution. Hostalen ACP 5831 D is not intended for use in medical and pharmaceutical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Organoleptic Properties
  • High ESCR (Stress Crack Resist.)
  • High Rigidity
  • High Stiffness
  • Wide Molecular Weight Distribution
Uses 
  • Blow Molding Applications
  • Bottles
  • Consumer Applications
  • Jerricans
  • Packaging
  • Sporting Goods
  • Toys
  • Vials
Forms 
  • Pellets
Processing Method 
  • Extrusion Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance
hr
 ASTM D1693
FNCT 2 (176°F)
hr
 ISO 16770
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (-22°F)
ft·lb/in²
 ISO 179/1eA
Tensile Impact Strength (-22°F)
ft·lb/in²
 ISO 8256/1
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness (H 132/30)
psi
 ISO 2039-1
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostalen ACP 5831 D, Hostalen , HostalenACP5831D, ACP 5831 D, ACP5831, 5831D, ACP5831D, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 5831ACP
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Rigidity, High Stiffness, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, Good Organoleptic Properties.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
23.5 MPa, 2% Arcopal
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.