IDES Prospector Already have an account? Login Here

IDES

NAXALOY® 770 GF16

Acrylonitrile Butadiene Styrene + PC

Glass Fiber Reinforcement, 16%

Supplied by MRC Polymers, Inc.

The technical datasheet with complete property values for NAXALOY® 770 GF16 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 16% Filler by Weight
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.126 in)
psi
 ASTM D638
Flexural Modulus (0.126 in)
psi
 ASTM D790
Flexural Strength (0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
0.126 in
ft·lb/in
  
-22°F, 0.126 in
ft·lb/in
  
Unnotched Izod Impact (0.126 in)
ft·lb/in
 ASTM D256
Instrumented Dart Impact
     ASTM D3763
-20°F, 0.126 in
in·lb
  
73°F, 0.126 in
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 0.126 in)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
      
--
°F
 ASTM D1525 2
--
°F
 ASTM D1525 3
Flammability
Nominal Value
Unit
Test Method
Flammability
 
 FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NAXALOY® 770 GF16, NAXALOY 770 GF16, NAXALOY® , NAXALOY, NAXALOY770GF16, 770 GF 16, 770 GF16, 770GF, GF16, 770GF16, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, MRC Polymers, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, GF770
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Dew Point
°F
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Cushion
in
  
Injection Notes
Packing: 50 - 75% of injection pressure
Hold: 40 - 60% of injection pressure
Airflow Rate: 0.8 - 1.0 CFM per lb/hour resin processed
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
3Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.