IDES Prospector Already have an account? Login Here

IDES

REXPEARL® EAA A211S

Ethylene Acrylic Acid Copolymer

Supplied by Japan Polychem Corporation

The technical datasheet with complete property values for REXPEARL® EAA A211S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Uses 
  • Laminates
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature (DSC)
°F
 ISO 3146
Additional Information
Most properties were tested according to JIS standards.
Acrylic Acid Content: 8.5%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: REXPEARL® EAA A211S, REXPEARL EAA A211S, REXPEARL® EAA , REXPEARL EAA, REXPEARLEAAA211S, REXPEARLEAA, EAAA 211 S, EAAA211S, EAAA211, EAA, A 211 S, A211S, A211, 211S, Ethylene Acrylic Acid Copolymer, Thermoplastic Elastomer, TPE, Japan Polychem, EthyleneAcrylicAcidCopolymer, ThermoplasticElastomer, 211A, 211EAAA
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.