IDES Prospector Already have an account? Login Here

IDES

KERNEL® KF271

Ethylene-based Plastomer

Supplied by Japan Polychem Corporation

The technical datasheet with complete property values for KERNEL® KF271 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Low Temperature Heat Sealability
Uses 
  • Film
  • Stretch Wrap
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (Compression Molded)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strain (Break, Compression Molded)
%
 ISO 527-2
Flexural Modulus (Compression Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
 
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ISO 974
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature (DSC)
°F
 ISO 3146
Additional Information
Most properties were tested according to JIS standards.
Tensile Elongation at Break, JIS K6922-2: >500%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: KERNEL® KF271, KERNEL KF271, KERNEL® , KERNEL, KERNELKF271, KF 271, KF271, Plastomer, Ethylene-based, Plastomer Ethylenebased, Plastomer, Ethylene:based, Plastomer, Ethylene/based, Plastomer, Ethylene+based, Plastomer, Ethylene_based, Plastomer, Ethylene based, Plastomer, Thermoplastic Elastomer, TPE, Japan Polychem, PlastomerEthylenebased, Plastomer Ethylene_based, Plastomer Ethylene based, ThermoplasticElastomer, PlastomerEthylene_based, 271KF
Features
Features may also be described by the following terms: Low Temperature Heat Sealability, Low Temperature Heat Seal.
Uses
Uses may also be described by the following terms: Stretch Wrap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.