Borealis PP BG383MO Borealis Polypropylene Impact Copolymer

Product Description

BG383MO is a heterphasic copolymer (block copolymer) characterised by an optimum combination of high impact strength and stiffness.
BG383MO is formulated for excellent antistatic performance. Electrostatic charge half time decay <2 sec. after 48 hours (Borealis method). Nucleation provides increased crystallisation temperature and good flow properties create a high potential for cycle time reduction particularly in the packaging area.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Europe

Additive

Antistatic

Nucleating Agent

Features

Antistatic

Block Copolymer

Fast Molding Cycle

Good Flow

High Impact Resistance

High Stiffness

Nucleated

Recyclable Material

Uses

Packaging

Pails

Thin-walled Parts

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (Injection Molded)		psi	ISO 527-2/1
Tensile Stress (Yield, Injection Molded)		psi	ISO 527-2/50
Tensile Strain (Yield, Injection Molded)		%	ISO 527-2/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-4°F, Injection Molded		ft·lb/in²
73°F, Injection Molded		ft·lb/in²
Multi-Axial Instrumented Impact Energy			ISO 6603-2
-4°F, Injection Molded		ft·lb
32°F, Injection Molded		ft·lb
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/Bf
Additional Information
The values listed were tested in accordance with ISO 1873-2 (97), based on 7 days conditioning time.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis PP BG383MO, Borealis PP , BorealisPPBG383MO, BorealisPP, PPBG 383 MO, PPBG383MO, PPBG383, PP, BG 383 MO, BG383MO, BG383, 383MO, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, Borealis, PolypropyleneImpactCopolymer, PPImpactCopolymer, 383BG, 383PPBG
Features
Features may also be described by the following terms: Block Copolymer, High Impact Resistance, High Stiffness, Good Flow, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Holding Pressure		psi

Notes

¹Typical properties: these are not to be construed as specifications.

Borealis PP BG383MO

Polypropylene Impact Copolymer

Supplied by Borealis AG