IDES Prospector Already have an account? Login Here

IDES

Borstar® FB1350

Medium Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Borstar® FB1350 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borstar FB1350 is a linear medium density polyethylene grade combining excellent extrusion properties with high film stiffness.

Borstar FB1350 is well suited for mono- and coextrusion of films produced with high neck or low neck extrusion.

Borstar FB1350 contains antioxidant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • High Stiffness
  • Recyclable Material
Uses 
  • Bags
  • Blending
  • Film
  • Geo Membranes
  • Heavy-duty Bags
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3
MD
psi
  
TD
psi
  
Tensile Strength
     ISO 527-3
MD
psi
  
TD
psi
  
Tensile Elongation
     ISO 527-3
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ISO 7765-1
Elmendorf Tear Strength
     ISO 6383-2
MD
lbf/in
  
TD
lbf/in
  
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (20°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Puncture Resistance - Energy to Resist
ft·lb/in
 ISO 7765-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borstar® FB1350, Borstar FB1350, Borstar® , Borstar, BorstarFB1350, FB 1350, FB1350, Polyethylene, Medium Density, Polyethylene Medium Density, MDPE, Polyethylene, PE, Borealis, PolyethyleneMediumDensity, 1350FB
Features
Features may also be described by the following terms: High Stiffness.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags, Geomembranes, Geo Membranes.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Die Gap: 1.2 to 1.5 mm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.