IDES Prospector Already have an account? Login Here

IDES

Borstar® FB1460

High Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Borstar® FB1460 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borstar FB1460 is a high density polyethylene film grade which combine excellent extrusion behaviour with superior mechanical properties.

Films made of Borstar FB1460 have high strength and stiffness, and excellent consistency.

Borstar FB1460 contains antioxidant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
 
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • High Stiffness
  • High Strength
  • Recyclable Material
 
Uses 
  • Blending
  • Film
  • Geo Membranes
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ISO 1133
190°C/21.6 kg
g/10 min
 
190°C/5.0 kg
g/10 min
 
Films
Nominal Value
Unit
Test Method
Film Puncture Energy
in·lb
ASTM D5748
Film Puncture Force
lbf
ASTM D5748
Secant Modulus
    ASTM D882A
MD
psi
 
TD
psi
 
Tensile Strength
    ISO 527-3
MD
psi
 
TD
psi
 
Tensile Elongation
    ISO 527-3
MD: Break
%
 
TD: Break
%
 
Elmendorf Tear Strength
    ISO 6383-2
MD
lbf
 
TD
lbf
 
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/A50
Melting Temperature
°F
ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borstar® FB1460, Borstar FB1460, Borstar® , Borstar, BorstarFB1460, FB 1460, FB1460, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Borealis, PolyethyleneHighDensity, 1460FB
Features
Features may also be described by the following terms: High Strength, High Stiffness.
Uses
Uses may also be described by the following terms: Geomembranes, Geo Membranes.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Extrusion Notes
Neck height: 5 to 8 x die diameter
Blow up ratio: 3:1 to 5:1
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.