IDES Prospector Already have an account? Login Here

IDES

DUCTEL® S706

Acrylonitrile Butadiene Styrene

Glass Fiber Reinforcement, 30%

Supplied by Nanjing Lihan Chemical Co., Ltd.

The technical datasheet with complete property values for DUCTEL® S706 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Uses 
  • Electrical Parts
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption
      
24 hr
%
 ASTM D570
73°F, 24 hr
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Flexural Strength
      
--
psi
 ISO 178
Yield
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648, ISO 75-2/B
264 psi, Unannealed
°F
 ASTM D648, ISO 75-2/A
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Additional Information
Melt Mass-Flow Rate, ASTM D1238: 3 to 5 g/10 min
Melt Mass-Flow Rate, ISO 1133: 3 to 5 g/10 min
Notched Izod Impact, ASTM D256: 6.8 kJ/m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DUCTEL® S706, DUCTEL S706, DUCTEL® , DUCTEL, DUCTELS706, S 706, S706, Acrylonitrile Butadiene Styrene, ABS, AcrylonitrileButadieneStyrene, 706S
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.