| Specific Gravity |
|
|
|
|
|
--
|
|
--
|
|
ASTM D792 |
|
--
|
|
--
|
g/cm³
|
ISO 1183 |
| Molding Shrinkage - Flow |
|
--
|
in/in
|
ASTM D955 |
| Water Absorption |
|
|
|
|
|
24 hr
|
|
--
|
%
|
ASTM D570 |
|
73°F, 24 hr
|
|
--
|
%
|
ISO 62 |
|
Equilibrium
|
|
--
|
%
|
ASTM D570 |
|
Equilibrium, 73°F, 50% RH
|
|
--
|
%
|
ISO 62 |
| Tensile Strength (Break) |
|
|
psi
|
ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) |
|
|
%
|
ASTM D638, ISO 527-2 |
| Flexural Modulus |
|
|
psi
|
ASTM D790, ISO 178 |
| Flexural Strength |
|
|
|
|
|
--
|
|
|
psi
|
ISO 178 |
|
Yield
|
|
|
psi
|
ASTM D790 |
| Notched Izod Impact Strength |
|
|
|
ISO 180 |
| Rockwell Hardness (R-Scale) |
|
|
|
ISO 2039-2 |
| Deflection Temperature Under Load |
|
|
|
|
|
66 psi, Unannealed
|
|
--
|
°F
|
ASTM D648, ISO 75-2/B |
|
264 psi, Unannealed
|
|
--
|
°F
|
ASTM D648, ISO 75-2/A |
| Melting Temperature |
|
--
|
°F
|
|
| Surface Resistivity |
|
|
ohms
|
ASTM D257 |
| Dielectric Strength |
|
--
|
V/mil
|
ASTM D149 |
|
|
Notched Izod Impact, ASTM D256: 60 kJ/m²
|
|
|
Elongation at Break, ASTM D638: >80%
Elongation at Break, ISO 527: >80%
Notched Izod Impact, ASTM D256: No Break kJ/m²
|
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: DUCTEL® A801, DUCTEL A801, DUCTEL® , DUCTEL, DUCTELA801, A 801, A801, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Polyamide66, Nylon66, 801A
|
|
|
Generic Name may also be described by the following terms: PA66.
|
|
|
Generic Name may also be described by the following terms: PA66.
|
|
|
Features may also be described by the following terms: Good Impact Resistance, Self-Lubricating, Self Lubricating.
|
|
|
Uses may also be described by the following terms: Tubing, Tube.
|
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: DUCTEL® A801, DUCTEL A801, DUCTEL® , DUCTEL, DUCTELA801, A 801, A801, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Polyamide66, Nylon66, 801A
|