IDES Prospector Already have an account? Login Here

IDES

Zhongfa PC G2810

Polycarbonate

Glass Fiber Reinforcement, 10%

Supplied by Yuyao Zhongfa Engineering Plastics Co. Ltd.

The technical datasheet with complete property values for Zhongfa PC G2810 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Good Dimensional Stability
  • High Heat Resistance
  
Uses 
  • Appliances
  • Automotive Applications
  • Electrical/Electronic Applications
  • Sporting Goods
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (Equilibrium)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Additional Information
Flexural Modulus, ASTM D790: 3300 to 3400 MPa
Flexural Strength, ASTM D790: 110 to 120 MPa
HDT at 264 psi, ASTM D648: 142 to 144°C
HDT at 66 psi, ASTM D648: 148 to 150°C
Notched Izod Impact, ASTM D256: 12 to 17 kJ/m²
Tensile Elongation, ASTM D638: 6 to 7%
Tensile Strength, ASTM D638: 70 to 80 MPa
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zhongfa PC G2810, Zhongfa PC , ZhongfaPCG2810, ZhongfaPC, PCG 2810, PCG2810, PC, G 2810, G2810, Polycarbonate, 2810G, 2810PCG
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, High Heat Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.