IDES Prospector Already have an account? Login Here

IDES

Zhongfa PC/ABS CW-100

Acrylonitrile Butadiene Styrene + PC

Supplied by Yuyao Zhongfa Engineering Plastics Co. Ltd.

The technical datasheet with complete property values for Zhongfa PC/ABS CW-100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Asia Pacific
Features 
  • Good Processability
  • High Flow
  
Uses 
  • Appliances
  • Electrical/Electronic Applications
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Notched Izod Impact, ASTM D256: 45 kJ/m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zhongfa PC/ABS CW-100, Zhongfa PCABS CW100, Zhongfa PC/ABS , Zhongfa PCABS, Zhongfa PC:ABS, Zhongfa PC+ABS, Zhongfa PC-ABS, Zhongfa PC_ABS, Zhongfa PC ABS, ZhongfaPCABSCW100, ZhongfaPCABS, PC ABSCW 100, ZhongfaPC_ABS, CW, PC/ABSCW-100, PCABSCW100, PC:ABSCW-100, PC+ABSCW-100, PC-ABSCW-100, PC_ABSCW-100, PC ABSCW-100, PC/ABSCW:100, PC/ABSCW/100, PC/ABSCW+100, PC/ABSCW_100, PC/ABSCW 100, PCABSCW, ABSCW100, PC/ABSCW, PC:ABSCW, PC+ABSCW, PC-ABSCW, PC_ABSCW, PC ABSCW, PC_ABSCW100, PC ABSCW100, PCABSCW_100, PCABSCW 100, CW-100, CW100, CW:100, CW/100, CW+100, CW_100, CW 100, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 100CW, ABSCWPC
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.