IDES Prospector Already have an account? Login Here

IDES

Zhongfa PP ZF-T20

Polypropylene

Talc Filler, 20%

Supplied by Yuyao Zhongfa Engineering Plastics Co. Ltd.

The technical datasheet with complete property values for Zhongfa PP ZF-T20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Features 
  • Electrically Insulating
  • Good Dimensional Stability
  • Good Flow
  • High Gloss
  • Medium Heat Resistance
Uses 
  • Appliances
  • Furniture
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
ASTM D1238
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Additional Information
Aging Resistance at 150°C: 750 hr
Notched Izod Impact, ASTM D256: 4.5 kJ/m²
Unnotched Izod Impact, ASTM D256: 22 kJ/m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zhongfa PP ZF-T20, Zhongfa PP ZFT20, Zhongfa PP , ZhongfaPPZFT20, ZhongfaPP, PPZF T 20, ZF, PPZF-T20, PPZFT20, PPZF:T20, PPZF/T20, PPZF+T20, PPZF_T20, PPZF T20, PPZFT, PPZF, ZF T 20, ZF-T20, ZFT20, ZF:T20, ZF/T20, ZF+T20, ZF_T20, ZF T20, ZFT, T20, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, TZF, TPPZF
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Gloss, Good Dimensional Stability, Dimensionally Stable, Medium Heat Resistance, Good Flow.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.