IDES Prospector Already have an account? Login Here

IDES

Zhongfa PP pp6

Polypropylene

Mineral Filler, 20%

Supplied by Yuyao Zhongfa Engineering Plastics Co. Ltd.

The technical datasheet with complete property values for Zhongfa PP pp6 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Mineral Filler, 20% Filler by Weight
Features 
  • Electrically Insulating
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Flow
  • High Gloss
  • High Heat Resistance
Uses 
  • Appliances
  • Automotive Applications
  • Electrical/Electronic Applications
  • Furniture
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
Aging Resistance at 150°C: 750 hr
Notched Izod Impact, ASTM D256: 4.5 kJ/m²
Unnotched Izod Impact, ASTM D256: 22 kJ/m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zhongfa PP pp6, Zhongfa PP , ZhongfaPPpp6, ZhongfaPP, PPpp 6, PPpp6, PP, pp 6, pp6, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PolypropyleneUnspecified, PPUnspecified, 6pp, 6PPpp
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Flow, Good Dimensional Stability, Dimensionally Stable, Good Chemical Resistance, Chemical Resistant, High Heat Resistance, High Gloss.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.