IDES Prospector Already have an account? Login Here

IDES

TechnoMid A500

Polyamide 66

Supplied by TechnoCompound GmbH

The technical datasheet with complete property values for TechnoMid A500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TechnoMid compounds are particularly suitable for technical applications due to their outstanding characteristics. The excellent sliding qualities and the favourable abrasion behaviour of TechnoMid compounds also permit their use in bearings.
TechnoMid compounds count among the technical thermoplastic compounds.
PA6 is made from caprolactam by means of hydrolytic polymerisation. The PA6.6 is produced by poly-condensation of hexa-ethylene diamine and adipic acid.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Impact Modifier
Features 
  • Good Abrasion Resistance
  • Impact Modified
  
Uses 
  • Appliances
  • Automotive Applications
  • Bearings
  • Electrical Housing
  • Electrical/Electronic Applications
  • Furniture
  • Gears
  • Household Goods
  • Plugs
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Additional Information
Moisture Content, Infared 105°C, 15 min: <0.10%
Ash Content, ISO 3451, 950°C: <1%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TechnoMid A500, TechnoMid , TechnoMidA500, A 500, A500, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, TechnoCompound, Polyamide66, Nylon66, 500A
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Electrical Housings, Electrical Housing, Household Goods, Housewares.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.