IDES Prospector Already have an account? Login Here

IDES

TechnoPet 3310

Polyethylene Terephthalate

Glass Fiber Reinforcement, 10%

Supplied by TechnoCompound GmbH

The technical datasheet with complete property values for TechnoPet 3310 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TechnoPet compounds count among the thermoplastic polyesters based on polyethylene-terephthalate. They are predestined for injection moulding due to their fast crystallisation.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Crystalline
  • Good Dimensional Stability
  • Good Surface Finish
  • Good Thermal Stability
  • High Stiffness
Uses 
  • Appliances
  • Automotive Applications
  • Bearings
  • Electrical/Electronic Applications
  • Electronic Insulation
  • Gears
  • Household Goods
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Additional Information
Moisture Content, Infared 105°C, 15 min: <0.10%
Ash Content, ISO 3451, 950°C: 10%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TechnoPet 3310, TechnoPet , TechnoPet3310, 3310, Polyethylene Terephthalate, PET, Polyester, TechnoCompound, PolyethyleneTerephthalate
Features
Features may also be described by the following terms: High Stiffness, Good Thermal Stability, Good Surface Finish, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Electronic Insulation, Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Household Goods, Housewares.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.