IDES Prospector Already have an account? Login Here

IDES

EGYPTENE LL 0209 KJ

Linear Low Density Polyethylene

Supplied by Sidpec (Sidi Kerir Petrochemicals Co.)

The technical datasheet with complete property values for EGYPTENE LL 0209 KJ is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL 0209 KJ is a LLDPE copolymer with butane as comonomer which contains antioxidant, slip and antiblock additives. It gives film of high slip which is easily separable. It is recommended for general purpose applications. It is suitable for blending with conventional LDPE.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Antiblock
  • Antioxidant
  • High Slip
Features 
  • Antiblocking
  • Antioxidant
  • Butene Comonomer
  • Copolymer
  • General Purpose
  • Good Drawdown
  • High Slip
  • High Strength
  • Low Density
  • Puncture Resistant
Uses 
  • Bags
  • Blending
  • Film
  • General Purpose
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-3
MD: Yield
psi
  
TD: Yield
psi
  
MD
psi
  
TD
psi
  
Tensile Elongation
     ISO 527-3
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709
Additional Information
The ISO Film properties were tested in accordance with ISO 1184.
Tear Strength MD, ASTM D1709: 145 g/25µ
Tear Strength TD, ASTM D1709: 370 g/25µ
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EGYPTENE LL 0209 KJ, EGYPTENE , EGYPTENELL0209KJ, LL 0209 KJ, LL0209, 0209KJ, LL0209KJ, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Sidpec, PolyethyleneLinearLowDensity, 0209LL
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Butene Comonomer, Low Density, Low Specific Gravity, Good Drawdown, Good draw down, Good Puncture Resistance, Puncture Resistant, High Slip, High Strength.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.