Already have an account? Login Here

IDES

Marfran® 4100

Thermoplastic Elastomer

Supplied by Francesco Franceschetti Elastomeri srl

The technical datasheet with complete property values for Marfran® 4100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General

Material Status

Commercial: Discontinued

Availability

Europe

Features

Good Processability

Uses

Gaskets

Appearance

Black

Colors Available

Natural Color

Forms

Pellets

Processing Method

Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
100% Strain		psi
300% Strain		psi
Tensile Stress (Yield)		psi	ISO 37
Tensile Elongation (Break)		%	ISO 37
Tear Strength		lbf/in	ISO 34-1
Compression Set (73°F, 24.0 hr)		%	ISO 815
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)			ISO 868
Additional Information
The value listed as Density, ISO 1183, was tested in accordance with ISO 2781. Ozone Resistance, ISO 1431/1: No cracking
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marfran® 4100, Marfran 4100, Marfran® , Marfran, Marfran4100, 4100, Thermoplastic Elastomer, TPE, ThermoplasticElastomer
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Gaskets, Gasketing.

Notes

¹Typical properties: these are not to be construed as specifications.

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.