IDES Prospector Already have an account? Login Here

IDES

Mediprene™ 500210M

Styrene Ethylene Butylene Styrene Block Copolymer

Supplied by ELASTO

The technical datasheet with complete property values for Mediprene™ 500210M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
Uses 
  • Automotive Applications
  • Electrical/Electronic Applications
  • Footwear
  • Furniture
  • Household Goods
  • Sporting Goods
  • Stationary Supplies
Agency Ratings 
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
    ASTM D412
100% Strain
psi
 
300% Strain
psi
 
Tear Strength
lbf/in
ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Additional Information
Mediprene grades are safe for sterilisation by autoclave (121°C, 15 min), Ethylene oxide, Electron accelerator irradiation (3.5 Mrad), Beta irradiaion (2.5 and 5.0 Mrad), and Gamma irradiation (2.5 and 5.0 Mrad).
Related Terminology
This supplier and product may also be known by these terms: British Vita

Product names can be difficult to match. You may have searched any one of these terms to find this product: Mediprene™ 500210M, Mediprene 500210M, Mediprene™ , Mediprene, Mediprene500210M, 500210 M, 500210M, Styrene Ethylene Butylene Styrene Block Copolymer, SEBS, Thermoplastic Elastomer, TPE, Elasto, StyreneEthyleneButyleneStyreneBlockCopolymer, ThermoplasticElastomer, M500210
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector, Household Goods, Housewares.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): USP (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Injection Notes
Compounds are not hygroscopic, and thus do not need any pre-drying.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Extrusion Notes
Compounds are not hygroscopic, and thus do not need any pre-drying.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.