IDES Prospector Already have an account? Login Here

IDES

ULM™ 17220 Black

Thermoset, Unspecified

Supplied by DSM Somos®

The technical datasheet with complete property values for ULM™ 17220 Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The low durometer Somos® ULM™ 17220 has a 70 Shore A hardness and is ideal for applications where toughness and flexibility are important.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Flexibility
  • Good Toughness
  • Low Hardness
Appearance 
  • Black
Forms 
  • Liquid
Processing Method 
  • Stereo Lithography
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Water Absorption (Saturation)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
60 Hz
 
  
1 kHz
 
  
1 MHz
 
  
Additional Information
Viscosity, 30°C: 3400 cps
Density (liquid), 23°C: 1.07 g/cm³
Optical Properties at 355 nm:
  • Dp (slope of cure-depth vs. ln(E) curve): 0.130 mm
  • Ec (critical exposure): 3.69 mJ/cm²
  • E10 (exposure that gives 0.254 mm (0.010 in) thickness): 26 mJ/cm²
Tear Strength (Graves), ASTM D1004: 45.9 lbf/in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ULM™ 17220 Black, ULM 17220 Black, ULM™ , ULM, ULM17220Black, 17220 Black, 17220Black, Thermoset, Unspecified, Thermoset Unspecified, TS, Unspecified, TS Unspecified, Thermoset, TS, ThermosetUnspecified, TSUnspecified, Black17220
Features
Features may also be described by the following terms: Low Hardness, Good Flexibility, Flexible, Good Toughness, Tough.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.