IDES Prospector Already have an account? Login Here

IDES

UBE Nylon 1024JI

Polyamide 6

Supplied by UBE Engineering Plastics, S.A.

The technical datasheet with complete property values for UBE Nylon 1024JI is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
UBE NYLON 1024 JI is plasticized and impact modified, high viscosity Polyamide 6. It is most suitable for application in contact with fuel, such as for multilayer fuel lines.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Impact Modifier
  • Plasticizer
  
Features 
  • Fuel Resistant
  • Good Processability
  • High Impact Resistance
  • Impact Modified
  
Uses 
  • Fuel Lines
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (235°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Melting Temperature (DSC)
°F
 ISO 3146
Additional Information
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357.
Extractable Content, DIN 53738 (A): 17.5 wt%
Tensile Strain at Break, ISO 527: >200%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: UBE Nylon 1024JI, UBE Nylon , UBENylon1024JI, UBENylon, Nylon 1024 JI, Nylon1024JI, Nylon1024, Nylon, 1024 JI, 1024JI, Polyamide 6, Nylon 6, Polyamide, pa6, UBE Engineering Plastics, Polyamide6, Nylon6, JI1024, 1024Nylon
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Impact Resistance, Good Processability, Easy Processing.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.