IDES Prospector Already have an account? Login Here

IDES

UBE Nylon 5034 FDX17

Polyamide 66/6 Copolymer

Supplied by UBE Engineering Plastics, S.A.

The technical datasheet with complete property values for UBE Nylon 5034 FDX17 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
UBE NYLON 5034 FDX17 is a high viscosity Polyamide 6/6.6 copolymer containing an anti block agent. The material is especially suitable as outer layer for air-cooled blown film (asymmetric layer structure). Typical applications are for pouches and thermoformed products.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Good Processability
  • High Clarity
  • High Shrinkage
  • High Viscosity
Uses 
  • Film
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Films
Nominal Value
Unit
Test Method
Secant Modulus - MD (Cast Film)
psi
 ASTM D882
Tensile Strength - MD
     ASTM D882
Yield, Cast Film
psi
  
Break, Cast Film
psi
  
Tensile Elongation - MD (Break, Cast Film)
%
 ASTM D882
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Optical
Nominal Value
Unit
Test Method
Gardner Gloss
 
 ASTM D523
Haze
%
 ASTM D1003
Additional Information
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357.
The value listed as Surface Resistivity, ASTM D257, was tested in accordance with UBE test methods.
Oxygen Permeability, ASTM D3985: 37 ml/m²/day
Relative Viscosity, JIS K6810, 96% H2SO4, conc. 1.0 g/100 ml: 4.09
Extractable Content, JIS K6810: <1.0 wt%
Molecular Ratio, PA6/PA6.6: 80/20
Water Vapor Permeability, JIS Z0208: 90 g/m²/day
Piercing Strength, JAS P1019, Cast Film: 9.5 N
Piercing Elongation, JAS P1019, Cast Film: 15 mm
Flex Crack Resistance, MIL B131B, 23°C, 1000 cycle, Cast Film: <10 hole/0.04 m²
Gelbo Test, MIL B131B, 5°C, 100 cycle, Cast Film: <10 hole/0.04 m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: UBE Nylon 5034 FDX17, UBE Nylon , UBENylon5034FDX17, UBENylon, Nylon 5034 FDX 17, Nylon5034 FDX17, Nylon5034, Nylon, 5034 FDX 17, Nylon5034FDX17, 5034 FDX17, 5034FDX, FDX17, 5034FDX17, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, pa666, UBE Engineering Plastics, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, FDX5034, 5034Nylon
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: High Viscosity, High Shrinkage, High Clarity, Antiblocking, Unspecified Antiblock, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.