IDES Prospector Already have an account? Login Here

IDES

UBE Nylon 7034 B

Polyamide 612

Supplied by UBE Engineering Plastics, S.A.

The technical datasheet with complete property values for UBE Nylon 7034 B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
UBE NYLON 7034 B is a high viscosity PA6/12 Copolyamide. It is suitable for applications with indirect food contact according FDA and EU regulations. The grade can be used for cast film and blown film (air or water cooled).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
  • Good Processability
  • High Clarity
  • High Shrinkage
  • High Viscosity
Uses 
  • Cast Film
  • Film
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Films
Nominal Value
Unit
Test Method
Secant Modulus - MD
psi
 ASTM D882
Tensile Strength - MD
     ASTM D882
Yield
psi
  
Break
psi
  
Tensile Elongation - MD (Break)
%
 ASTM D882
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Optical
Nominal Value
Unit
Test Method
Gardner Gloss
 
 ASTM D523
Haze
%
 ASTM D1003
Additional Information
The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357.
The value listed as Surface Resistivity, ASTM D257, was tested in accordance with UBE test methods.
Coefficient of Friction, ASTM D1894, Dynamic: >1
Coefficient of Friction, ASTM D1894, Static: >1
Molecular Ratio, PA6/PA12: 80/20
Oxygen Permeability, ASTM D3985: 85 ml/m²/day
Surface Resistivity, UBE Method: >1e15 ohm
Extractable Content, JIS K6810: <1.0 wt%
Relative Viscosity, JIS K6810, 96% H2SO4, conc. 1.0 g/100 ml: 3.8
Water Vapor Permeability, JIS Z0208: 85 g/m²/day
Piercing Strength, JAS P1019: 850 N/mm
Piercing Elongation, JAS P1019: 14.5 mm
Flex Crack Resistance, MIL B131B, 23°C, 1000 cycle: <20 hole/0.04 m²
Gelbo Test, MIL B131B, 5°C, 100 cycle: <10 hole/0.04 m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: UBE Nylon 7034 B, UBE Nylon , UBENylon7034B, UBENylon, Nylon 7034 B, Nylon7034 B, Nylon7034, Nylon, Nylon7034B, 7034 B, 7034B, Polyamide 612, Nylon 612, Polyamide, pa612, UBE Engineering Plastics, Polyamide612, Nylon612, B7034, 7034Nylon
Generic Name
Generic Name may also be described by the following terms: PA612, PA6/12.
Features
Features may also be described by the following terms: High Viscosity, High Shrinkage, High Clarity, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Cast Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.