IDES Prospector Already have an account? Login Here

IDES

AvaSpire® AV-750 GF40

Polyaryletherketone

Glass Fiber Reinforcement, 40%

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for AvaSpire® AV-750 GF40 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AvaSpire AV-750 GF40 is a 40% glass reinforced polyaryletherketone (PAEK)designed to fill the marketplace need for a lower-priced PEEK (polyetheretherketone). This resin provides the typical chemical resistance expected of PEEK while maintaining excellent elevated temperature properties.

The price and performance of this resin will expand the opportunities for PEEK resins especially in the area of metal replacement for corrosion control.

  • Natural: AvaSpire AV-750 GF40 NT
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • Flame Retardant
  • Good Chemical Resistance
  • Good Dimensional Stability
  • High Heat Resistance
  • High Stiffness
  • High Strength
Uses 
  • Aircraft Applications
  • Electrical/Electronic Applications
  • Metal Replacement
  • Seals
  
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
  • Machining
  • Profile Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) 2 (380°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage 3
     ASTM D955
Flow: 0.125 in
in/in
  
Across Flow: 0.125 in
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 4
psi
 ASTM D638
--
psi
 ISO 527-2/1A/1
Tensile Stress
      
Yield, 0.197 in
psi
 ISO 527-2/1A/5
-- 5
psi
 ASTM D638
Tensile Elongation
      
Break 4
%
 ASTM D638
Break
%
 ISO 527-2/1A/5
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
73°F
psi
 ASTM D790
482°F
psi
 ASTM D790
--
psi
 ISO 178
Compressive Strength
psi
 ASTM D695
Shear Strength
psi
 ASTM D732
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
--
ft·lb/in
 ASTM D256
--
ft·lb/in²
 ISO 180
Unnotched Izod Impact
      
--
ft·lb/in
 ASTM D4812
--
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
°F
 ASTM D648
Glass Transition Temperature (DSC)
°F
 ASTM D3418
Peak Melting Temperature
°F
 ASTM D3418
CLTE - Flow (-58 to 122°F)
in/in/°F
 ASTM E831
Specific Heat
     DSC
122°F
Btu/lb/°F
  
392°F
Btu/lb/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM E1530
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
1 kHz
 
  
1 MHz
 
  
60 MHz
 
  
Dissipation Factor
     ASTM D150
60 Hz
 
  
1 kHz
 
  
1 MHz
 
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F, 1000 sec^-1)
Pa·s
 ASTM D3835
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AvaSpire® AV-750 GF40, AvaSpire AV750 GF40, AvaSpire® , AvaSpire, AvaSpireAV750GF40, AV, AV 750 GF 40, AV-750 GF40, AV750 GF40, AV:750 GF40, AV/750 GF40, AV+750 GF40, AV_750 GF40, AV 750 GF40, AV750, 750GF, GF40, AV750GF40, AV_750GF40, Polyaryletherketone, PAEK, Solvay Specialty, 750AV
Features
Features may also be described by the following terms: High Heat Resistance, Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, High Stiffness, High Strength.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Under normal molding conditions AvaSpire AV-750 GF40 has lower viscosity and higher flow than AV-650 GF30.
35" x 0.5" x 0.125" bars
40.20 in/min
52.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.