Galloo GP 157 Galloo Polypropylene, Unspecified

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield		psi
Break		psi
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
0°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/A
Additional Information
The value listed as Density, ISO 1183, was tested with Galloo Plastics test methods. Melt Mass-Flow Rate, ISO 1133, 230°C/2.16 kg: 13 to 17 g/10 min Flexural Modulus, ISO 178: 700 to 750 MPa Specific Gravity: 0.88 to 0.92
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Galloo GP 157, Galloo , GallooGP157, GP 157, GP157, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 157GP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): PSA Peugeot-Citroën (1).

Notes

¹Typical properties: these are not to be construed as specifications.

Galloo GP 157