Galloo GP 125T20 Galloo Polypropylene, Unspecified (Talc Filler, 20%)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage - Flow		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Additional Information
The value listed as Density, ISO 1183, was tested with Galloo Plastics test methods. Melt Mass-Flow Rate, ISO 1133, 230°C/2.16 kg: 10 to 14 g/10 min Flexural Modulus, ISO 178: 1200 to 1350 MPa Specific Gravity: 1.04 to 1.08
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Galloo GP 125T20, Galloo , GallooGP125T20, GP 125 T 20, GP 125T20, GP125, 125T, T20, GP125T20, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 125GP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): PSA Peugeot-Citroën (1).

Notes

¹Typical properties: these are not to be construed as specifications.

Galloo GP 125T20