IDES Prospector Already have an account? Login Here

IDES

Galloo GP 78T10

Polypropylene

Talc Filler, 10%

Supplied by Galloo Plastics

The technical datasheet with complete property values for Galloo GP 78T10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 10% Filler by Weight
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Additional Information
The value listed as Density, ISO 1183, was tested with Galloo Plastics test methods.
Melt Mass-Flow Rate, ISO 1133, 230°C/2.16 kg: 6 to 9 g/10 min
Specific Gravity: 0.95 to 0.99
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Galloo GP 78T10, Galloo , GallooGP78T10, GP 78 T 10, GP 78T10, GP78, 78T, T10, GP78T10, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 78GP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.