Already have an account? Login Here

IDES

Galloo GPPS 65

General Purpose Polystyrene

Supplied by Galloo Plastics

The technical datasheet with complete property values for Galloo GPPS 65 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General
Material Status	Commercial: Active
Availability	Europe
Appearance	Black
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180
0°F		ft·lb/in²
73°F		ft·lb/in²
Additional Information
The value listed as Density, ISO 1183, was tested with Galloo Plastics test methods. Melt Mass-Flow Rate, ISO 1133, 230°C/2.16 kg: 5 to 8 g/10 min Flexural Modulus, ISO 178: 1700 to 1800 MPa Tensile Stress at Break, ISO 527: 20 to 25 MPa Tensile Strain at Break, ISO 527: 15 to 25% Notched Izod Impact, ISO 180, 23°C: 4.5 to 5 kJ/m² Notched Izod Impact, ISO 180, -18°C: 4.5 to 5 kJ/m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Galloo GPPS 65, Galloo , GallooGPPS65, GPPS 65, GPPS65, PS, Polystyrene, General Purpose, Polystyrene General Purpose, PS (GPPS), PS GPPS, Polystyrene, PolystyreneGeneralPurpose, PSGPPS, 65GPPS

Notes

¹Typical properties: these are not to be construed as specifications.

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.