IDES Prospector Already have an account? Login Here

IDES

FREQTIS P1210A

Polyphenylene Sulfide

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for FREQTIS P1210A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage
    ISO 294-4
Across Flow: 0.0394 in
%
 
Flow: 0.0394 in
%
 
Water Absorption (73°F, 24 hr)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Flexural Strain
%
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
CLTE
    ISO 11359-2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
IEC 60093
Dielectric Constant
    IEC 60250
1 MHz
 
 
3.00 GHz
 
 
Dissipation Factor (3.00 GHz)
 
IEC 60250
Arc Resistance
sec
ASTM D495
Comparative Tracking Index
V
IEC 60112
Electric Strength (0.118 in)
V/mil
IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
UL 94
UL File Number
 
 
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (1000 sec^-1)
Pa·s
ISO 11443
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FREQTIS P1210A, FREQTIS , FREQTISP1210A, P 1210 A, P1210A, P1210, 1210A, Polyphenylene Sulfide, PPS, Polyplastics, PolyphenyleneSulfide, 1210P
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.