IDES Prospector Already have an account? Login Here

IDES

FREQTIS P0813A

Polyphenylene Sulfide

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for FREQTIS P0813A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
      
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Flexural Strain
%
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant
      
1 MHz 3
 
  
3.00 GHz 4
 
  
Dissipation Factor 4 (3.00 GHz)
 
  
Arc Resistance
sec
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.118 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
UL File Number
 
  
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (590°F, 1000 sec^-1)
Pa·s
 ISO 11443
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FREQTIS P0813A, FREQTIS , FREQTISP0813A, P 0813 A, P0813A, P0813, 0813A, Polyphenylene Sulfide, PPS, Polyplastics, PolyphenyleneSulfide, 0813P
Notes
1Typical properties: these are not to be construed as specifications.
280x80x2 mm
3Volumetric Method
4Cavity Resonator Method
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.