IDES Prospector Already have an account? Login Here

IDES

VENELENE® FA-0238

Low Density Polyethylene

Supplied by Poliolefinas Internacionales, C.A. POLINTER

The technical datasheet with complete property values for VENELENE® FA-0238 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • South America
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Break, 2.0 mil
psi
  
TD: Break, 2.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.0 mil
%
  
TD: Break, 2.0 mil
%
  
Elmendorf Tear Strength
     ASTM D1922
MD: 2.0 mil
g
  
TD: 2.0 mil
g
  
Optical
Nominal Value
Unit
Test Method
Transmittance (1.97 mil)
%
 ASTM D1003
Haze (1.97 mil)
%
 ASTM D1003
Additional Information
Dart Drop Impact, ASTM D1709, 50 µm: 28 kJ/m
Tenacity, ASTM D882, MD, 50 µm: 30 MPa
Tenacity, ASTM D882, TD, 50 µm: 54 MPa
Puncture Resistance, ASTM D3420, 50 µm: 1050 g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VENELENE® FA-0238, VENELENE FA0238, VENELENE® , VENELENE, VENELENEFA0238, FA, FA-0238, FA0238, FA:0238, FA/0238, FA+0238, FA_0238, FA 0238, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, PolyethyleneLowDensity, 0238FA
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.