IDES Prospector Already have an account? Login Here

IDES

Styrolux® GH 62

Styrene Butadiene Block Copolymer

Supplied by Styrolution

The technical datasheet with complete property values for Styrolux® GH 62 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Styroclear GH 62 is a high flow thermoplastic styrene-butadiene block copolymer with excellent mold release properties. It has crystal clarity, good toughness, good stiffness and warpage resistance for general injection molding applications. Styroclear GH 62 may be suitable for conventional thermoplastics processing technologies such as injection molding.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Mold Release
  • Good Stiffness
  • Good Toughness
  • High Clarity
  • High Flow
  • Warp Resistant
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2 (73°F)
psi
 ASTM D638
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Instrumented Dart Impact (Total Energy)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 3
Optical
Nominal Value
Unit
Test Method
Transmittance
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Styrolux® GH 62, Styrolux GH 62, Styrolux® , Styrolux, StyroluxGH62, GH 62, GH62, Styrene Butadiene Block Copolymer, SBC, Thermoplastic Elastomer, TPE, sb, Styrolution, StyreneButadieneBlockCopolymer, ThermoplasticElastomer, 62GH
Features
Features may also be described by the following terms: High Clarity, High Flow, High Melt, High MFI, Warp Resistant, Warpage Resistant, Good Toughness, Tough, Good Stiffness, Good Mold Release, Easy Release, Good Demolding.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.