IDES Prospector Already have an account? Login Here

IDES

Ultradur® B 4040 G10 BK5110

Polybutylene Terephthalate

Glass Fiber Reinforcement, 50%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultradur® B 4040 G10 BK5110 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultradur B 4040 G10 BK5110 is a pigmented black, injection molding PBT with 50% glass fiber reinforced for technical parts with excellent surface finish.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 50% Filler by Weight
Additive 
  • Mold Release
Features 
  • Good Surface Finish
Uses 
  • Automotive Exterior Parts
  • Engineering Parts
  • Handles
  • Housings
  
Agency Ratings 
RoHS Compliance 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
lb/in³
 ISO 1183 2
Melt volume-flow rate (275°C/5.0 kg)
in³/10min
 ISO 1133 2
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption
      
Saturation
%
 ASTM D570, ISO 62 2
Equilibrium, 50% RH
%
 ASTM D570
Equilibrium
%
 ISO 62 2
Viscosity Number (Reduced Viscosity)
ml/g
 ISO 1628
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Strength
      
Break, 73°F
psi
 ASTM D638
Break
psi
 ISO 527-2 2
Tensile Elongation
      
Break, 73°F
%
 ASTM D638
Break
%
 ISO 527-2 2
Flexural Modulus
      
73°F
psi
 ASTM D790
73°F
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength
     ISO 179/1eA 2
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
-40°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-40°F
ft·lb/in²
 ISO 180
73°F
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi
°F
 ISO 75-2 2
264 psi, Unannealed
°F
 ASTM D648
264 psi
°F
 ISO 75-2 2
Peak Melting Temperature
°F
 ASTM D3418, ISO 3146
CLTE - Flow
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity 3
ohm
 ASTM D257 2, IEC 60093 2
Volume Resistivity
      
0.0591 in
ohm·cm
 ASTM D257
--
ohm·in
 IEC 60093 2
Relative Permittivity
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultradur® B 4040 G10 BK5110, Ultradur B 4040 G10 BK5110, Ultradur® , Ultradur, UltradurB4040G10BK5110, B 4040 G 10 BK 5110, B 4040 G10 BK5110, B4040, 4040G, G10, 10BK, BK5110, B4040G10BK5110, Polybutylene Terephthalate, PBT, Polyester, BASF, PolybutyleneTerephthalate, 4040B
Features
Features may also be described by the following terms: Good Surface Finish.
Uses
Uses may also be described by the following terms: Housings, Housing, Engineering Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
31.5 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.