IDES Prospector Already have an account? Login Here

IDES

Ultramid® 8267G HS BK-106A

Polyamide 6

Glass Fiber Reinforcement, 15%; Mineral Filler, 25%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® 8267G HS BK-106A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid 8267G HS BK-106A is a heat stabilized, weather resistant, 40% mineral and glass fiber reinforced PA6 injection molding compound with improved UV resistance and sink mark resistance. The combination of mineral and glass fibers result in a high performance, low warp and cost effective engineering thermoplastic. It exhibits high strength, good UV resistance, rigidity and good heat distortion temperatures. It has a relatively high resistance to creep under load. The heat stabilizer system extends its retention of properties at elevated temperatures. It has good chemical resistance to greases, oils and hydrocarbons.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
  • Mineral Filler, 25% Filler by Weight
  
Additive 
  • Heat Stabilizer
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Flow
  • Good Processability
  • Good Stiffness
  • Good Surface Finish
  • Good Thermal Aging Resistance
  • Good UV Resistance
  • Heat Stabilized
  • High Strength
  • Low Viscosity
  • Low Warpage
  • Semi Crystalline
  • Warp Resistant
Uses 
  • Automotive Applications
  • Handles
  • Outdoor Applications
  • Wheels
  
Agency Ratings 
RoHS Compliance 
Automotive Specifications 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
--
lb/in³
 ISO 1183 2
Molding Shrinkage - Flow (0.125 in)
in/in
 ASTM D955
Water Absorption
      
24 hr
%
 ASTM D570
73°F, 24 hr
%
 ISO 62
Saturation
%
 ASTM D570, ISO 62 2
Saturation, 73°F
%
 ISO 62
Equilibrium, 50% RH
%
 ASTM D570
Equilibrium, 73°F, 50% RH
%
 ISO 62
Equilibrium
%
 ISO 62 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
73°F
psi
 ISO 527-2
--
psi
 ISO 527-2 2
Tensile Strength
      
Break, 73°F
psi
 ASTM D638
Break, 73°F
psi
 ISO 527-2
Break
psi
 ISO 527-2 2
Tensile Elongation
      
Break, 73°F
%
 ASTM D638, ISO 527-2
Break
%
 ISO 527-2 2
Flexural Modulus
      
73°F
psi
 ASTM D790
73°F
psi
 ISO 178
Flexural Strength
      
73°F
psi
 ASTM D790
73°F
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
      
-22°F
ft·lb/in²
 ISO 179
73°F
ft·lb/in²
 ISO 179
-22°F
ft·lb/in²
 ISO 179/1eA 2
73°F
ft·lb/in²
 ISO 179/1eA 2
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
66 psi
°F
 ISO 75-2 2
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi
°F
 ISO 75-2 2
Melting Temperature
°F
 ASTM D3418, ISO 3146
CLTE - Flow
in/in/°F
 ASTM E831
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® 8267G HS BK-106A, Ultramid 8267G HS BK106A, Ultramid® , Ultramid, Ultramid8267GHSBK106A, 8267 G HS BK, 8267G HS BK, 8267 G HS BK 106 A, 8267GHSBK, 8267G HS BK-106A, 8267G HS BK106A, 8267G HS BK:106A, 8267G HS BK/106A, 8267G HS BK+106A, 8267G HS BK_106A, 8267G HS BK 106A, 8267G, GHS, HSBK, BK106, 106A, 8267GHSBK106A, 8267GHSBK_106A, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, G8267
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Creep Resistance, Creep Resistant, Good Stiffness, High Strength, Good Surface Finish, Warp Resistant, Warpage Resistant, Low Warpage, Low Warp, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Semi-Crystalline, Good Flow, Good Processability, Easy Processing, Good Thermal Aging Resistance, Thermal Aging Resistant, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Low Viscosity.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ULC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.