Ultramid B 3G8 BK00564 BASF Polyamide 6 (Glass Fiber Reinforcement, 40%)

Product Description

Ultramid B3G8 BK00564 is a 40% glass reinforced, pigmented black, injection molding PA6 grade.

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 40% Filler by Weight

Additive

Heat Stabilizer

Features

Good Abrasion Resistance

Good Chemical Resistance

Good Creep Resistance

Good Dimensional Stability

Good Flow

Good Processability

Good Stiffness

Heat Stabilized

Low Viscosity

Oil Resistant

Semi Crystalline

Uses

Automotive Applications

Automotive Interior Parts

RoHS Compliance

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity
--		--		ASTM D792
--		--	lb/in³	ISO 1183²
Molding Shrinkage - Flow (0.125 in)		--	in/in	ASTM D955
Water Absorption
Saturation		--	%	ASTM D570, ISO 62²
Equilibrium, 50% RH		--	%	ASTM D570
Equilibrium		--	%	ISO 62²
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus			psi	ISO 527-2²
Tensile Stress (Break)			psi	ISO 527-2²
Tensile Strain (Break)			%	ISO 527-2²
Flexural Modulus (73°F)			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength				ISO 179/1eA²
-22°F		--	ft·lb/in²
73°F			ft·lb/in²
Charpy impact strength				ISO 179/1eU²
-22°F		--	ft·lb/in²
73°F			ft·lb/in²
Hardness	Dry	Conditioned	Unit	Test Method
Ball Indentation Hardness		--	psi	ISO 2039-1
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ISO 75-2²
66 psi		--	°F
264 psi		--	°F
Melting Temperature		--	°F	ASTM D3418, ISO 3146
CLTE - Flow		--	in/in/°F	ISO 11359-2²
Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity
0.0591 in		--	ohm·cm	ASTM D257
--		--	ohm·in	IEC 60093²
Dissipation Factor (100 Hz)		--		IEC 60250²
Comparative tracking index		--		IEC 60112²
Electric strength		--	V/mil	IEC 60243-1²
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 3G8 BK00564, Ultramid B 3G8 BK00564, Ultramid® B , Ultramid B, UltramidB3G8BK00564, UltramidB, B 3 G 8 BK 00564, B3G8 BK00564, B3, 3 G 8 BK 00564, B3G8BK00564, 3G8 BK00564, 3G, G8, 8BK, BK00564, 3G8BK00564, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, G3, 3B
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Good Creep Resistance, Creep Resistant, Semi-Crystalline, Good Dimensional Stability, Dimensionally Stable, Good Flow, Good Processability, Easy Processing, Good Stiffness, Low Viscosity.
Uses
Dry	Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 3G8 BK00564, Ultramid B 3G8 BK00564, Ultramid® B , Ultramid B, UltramidB3G8BK00564, UltramidB, B 3 G 8 BK 00564, B3G8 BK00564, B3, 3 G 8 BK 00564, B3G8BK00564, 3G8 BK00564, 3G, G8, 8BK, BK00564, 3G8BK00564, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, G3, 3B

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Ultramid® B 3G8 BK00564

Polyamide 6

Glass Fiber Reinforcement, 40%

Supplied by BASF Corporation